Manometer
Manometer for connecting to swivel
MANOM-F.SWIV
Register now and access more than 125,000 products
Connection of manometer to swivel joint
Working pressure is measured right at the pneumatic tool
Tip for pros!
Each connection leads to pressure losses. For this reason, a pneumatic system should only have as many connections as is really necessary. Insufficient operating pressure leads to performance losses, so the current operating pressure must be measured directly at the tool.
Datasheets(X)
Last viewed
pias® wing-type drilling screw, countersunk milling head with AW drive
LED UV torch For use when searching for leaks highlighted by UV leak detection additives in vehicle air-conditioning units
Cabin air filter QUICK FILTER PM 2.5
HSS DIN 338 SMART STEP twist drill bit
Pipe and fastening clamp Multifix
Hand tap, second tap HSS DIN 352
Ratchet lashing belt, one-part
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, plain
Vacuum hose
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)