Machine tap HSCo Longlife blue ring TiN through hole DIN 371/376
Machine screw tap HSCo longlife blue form B
MATAP-THRGHO-HSCO-DIN371-TIN-BLUE-M3
ZEBRA
Register now and access more than 125,000 products
Up to twice the service life as well as up to 50% higher cutting speed compared to similar uncoated tools
Optimized TiN coating
- Sufficient coolant and lubricant must be added when cutting threads.
- For the machine tap/material assignments, see the overview tables
Datasheets(X)
Before reversing the screw tap, the entire spiral point of the tool must be removed from the drill hole. Failure to do so may cause cutting edges to chip or the tool to break.
Thread type | Metric thread |
Material to be processed | Steel |
Hole type | Clearance hole ≤ 3xD |
Suitable for machine type | Milling/drill center |
Quality | ZEBRA-Premium |
Thread type x nominal diameter | M3 |
Pitch | 0.5 mm |
Length | 56 mm |
Shank diameter | 3.5 mm |
Size of square | 2.7 mm |
DIN | 371 |
Cutting material | HSCo |
Surface | TiN |
Form | B |
Core hole diameter | 2.5 mm |
Shank style | Cylindrical with square drive |
Tolerance of screw taps | ISO 2 (6H) |
Suitable for tensile strength up to | 1000 N/mm² |
Service life (points system) | 4 of 4 points |
Trueness to gauge (points system) | 4 of 4 points |
Versatility (points system) | 2 of 4 points |
Cutting behaviour (points system) | 3 of 4 points |
Chip formation (points system) | 3 of 4 points |
Material of sub-group | General structural steels |
Last viewed
1/2 inch socket wrench insert metric, hexagon, short
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
HSCo Multi Longlife machine tap for blind holes DIN 371/376
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Profile frame hinge, Nexis Click-on 94/10 to 45 AL
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
Drift punch According to DIN 6458
Mechanical manual crimping pliers WK 22 For replaceable half-shell crimping inserts, width 22 mm
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)