Intumescent mat plus
Intumescent mat plus
MAT-INTUM-125MM-10M
Register now and access more than 125,000 products
- 0 mm spacing between the insulation is possible
- Foams in the event of fire
- Easy to install, including at a later point in time
- No material exchange in fire areas
- Wall and ceiling ducts R 90 in solid structures P-3680/8053-MPA BS
- Wall ducts R 90 for lightweight partition walls P-3682/8073-MPA BS
- Wall and ceiling ducts R 90/R120 P-2400/985/19-MPA BS
- Wall and ceiling duct 90 or 120 minutes Z-19.53-2565
- Fire resistance rating of 90 or 120 minutes
Datasheets(X)
For use in the system [C] + [H2]
- Fire partition W combination [C]
- Pipe partition intumescent mat plus [H2]
For wall and ceiling ducts of flammable and non-flammable pipes that have flammable insulation, e.g. for cold piping insulated with rubber foam refrigeration insulation
- Material is placed around the insulation with a thickness of 1.1 mm in 2 layers and fixed to the insulation with steel wire (at least 0.8 mm)
- When using mineral wool or foam glass, building materials class A, only one layer is necessary
Thickness | 1.1 mm |
Length | 10 m |
Width | 125 mm |
Colour | Grey |
Last viewed
Ratchet lashing belt, one-part
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Hexagonal bolt with thread up to the head DIN 933, A4 stainless steel, plain
1/2-inch impact socket wrench insert hexagon, metric, long
Crimping tool For uninsulated flat connectors
Material processing, assortment/set
Slotted flat-head screws with shoulder DIN 923, steel 5.8, plain
TIPP® robust silicone pipe clamp
Application gun For air-conditioning leak detection additive
Hexagon Socket Head Cap Screw