Internal extractor, hexagonal, short
Internal extractor, hexagonal, short
EXTRIN-SHORT-HEX-WS13-L28-D5,5
Register now and access more than 125,000 products
Extractors are solutions for rusted, stripped or damaged nuts or screw heads. A general distinction is drawn between interior and exterior application. Internal application is ideal for handling hexagon socket screws or TX screws. External application is primarily suitable for hexagon head profiles.
Datasheets(X)
Select a suitable extractor and drive it into the screw using a 13 mm socket and ratchet. The aggressive conical spiral of the extractor bites securely into the screw material and enables it to be safely extracted. Also suitable for extracting broken-off bolts and screws. Spot drill the broken-off bolt or screw. Enlarge the bore by half a millimetre up to Ø 6 mm. Enlarge the bore by one millimetre for Ø 8–14 mm. Select a suitable extractor, screw it into the drilled hole and subsequently extract the screw or bolt.
Diameter | 5.5 mm |
Length | 28 mm |
Last viewed
No-hole sand paper with hook-and-loop backing AM LINE (green)
Rivet nut with small countersunk head Zinc-plated steel, blue passivated
Caulking gun up to 300 ml 14:1
Metric double box-end wrench Hexagon with POWERDRIV®
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Machine screw tap HSCo green ring through hole DIN 371/376
wSafe® 2000 pneumatic air multi-port distributor DMV
Machine screw tap HSCo blue ring through hole DIN 371/376
Tension spring with double eyes DIN 2097, spring steel wire, zinc-plated steel
Ring-shaped crimp cable lug DIN 46234 and similar