Interior trim clip, type 3
Interior trim clip, type 3
INTRMCLIP-POM-SEAL-UNCOL-(D8,1-8,5MM)
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | Neutral |
Min./max. drill hole diameter | 8.1-8.5 mm |
Min./max. attachment thickness | 0.8-0.8 mm |
Head diameter | 13.2 mm |
Core diameter | 5.5 mm |
Grip range head | 2.7 mm |
Max. width | 18 mm |
Length below head | 14.2 mm |
Type of vehicle | Passenger car |
Corresponds to original spare part number | 2E1827649, A0119887678 |
Corresponds to original spare part number 2 | A0119887678 |
Last viewed
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I10I, zinc-plated, yellow chromated (A2C/A3C)
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
Twist Drill bit HSCO DIN 338 TYPE RN
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Pump spray bottle
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
HSCo Multi Longlife machine tap for blind holes DIN 371/376
HSCo green-ring machine tap for blind holes DIN 371/376
Twist drill bit HSCo DIN 338 Type RN MFD VARIO