Interior trim clip, type 2
Interior trim clip, type 2
INTRMCLIP-FORD-WHITE
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | White |
Min./max. drill hole diameter | 8.1-8.5 mm |
Min./max. attachment thickness | 0.7-1 mm |
Head diameter | 13.2 mm |
Core diameter | 5.5 mm |
Grip range head | 2.3 mm |
Max. width | 18 mm |
Length below head | 14.2 mm |
Type of vehicle | Universal |
Corresponds to original spare part number | 6117693, A0069884378, M283083 |
Last viewed
Shim ring DIN 988, steel, plain
Impact cap
4-CUTTER PLUS HAMMER DRILL BITS
Thin-walled heat-shrink hose Without internal adhesive
Pass-through ratchet extension
Cross earth rod With connecting lug
TX insert bit
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip
Radiator paintbrush For solvent-based lacquer and paint systems
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain