Interior trim clip type 1
Interior trim clip, type 1
INTRMCLIP-MB-PLA
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | White |
Min./max. drill hole diameter | 7.5-7.7 mm |
Min./max. attachment thickness | 0.88-0.88 mm |
Head diameter | 13 mm |
Core diameter | 6 mm |
Grip range head | 2.5 mm |
Max. width | 18 mm |
Length below head | 12.7 mm |
Type of vehicle | Universal |
Corresponds to original spare part number | A0039884178 |
Last viewed
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Bit holder E 6.3 (1/4 inch) With stainless steel sleeve and snap ring
Air cndtnng srvc. unit, vhcls., spr prt
Wheel brush Stainless steel, crimped, with shank
Hand tap, third tap HSS DIN 352
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Adapters 10 mm x 1/4 inch
Specially fused alumina sanding tip, pink
Hexagon bolt with thread up to head
Assembly aid