Interior trim clip, closed
Interior trim clip with closed anchor
INTRMCLIP-POM-BLUE-D8,2MM
Art.-no. 0501105157
EAN 4046777720563
Register now and access more than 125,000 products
- Pre-mount on the trim and then insert into a corresponding hole on the base component
- Tolerance compensation is possible
- The trim can be removed
- Can also be used as a seal
Datasheets(X)
For fastening trims to carrier components.
Pre-mount on the trim and then insert into a corresponding hole on the base component.
 | |
Min./max. drill hole diameter | 8.20-8.30 mm |
Min./max. attachment thickness | 0.70-1.50 mm |
Head diameter (A) | 13.00 mm |
Length below head (B) | 15.10 mm |
Core diameter (C) | 4.50 mm |
Grip range head (D) | 2.90 mm |
Colour | Blue |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | BMW, MINI, Citroen, Peugeot |
Corresponds to original spare part number | 51139804996, 8337FC, 6991Z1 |
Installation location | Interior, Bodywork |
Type of vehicle | Passenger car |
Last viewed
O-ring, imperial NBR 70
Specially fused alumina sanding tip, pink
Bevelled-edge chisel in accordance with DIN 5139
Curing film For window repair
Mounting plate TIOMOS 1D with two-point attachment for assembly with ASSY or Euro screws
Joint nozzle
Underfloor guide partial extension Dynamic NT soft-close
Hexagonal bolt with thread up to head ISO 4017, hot-dip galvanised 8.8U steel (TZN)
Medium-strength flange sealant
Heat-shrink crimp ring connector