Impact tool Pin punches with pilots in accordance with DIN 6450
Pin punch, locking pins
PINPNCH-TAP
Register now and access more than 125,000 products
Chromium-vanadium air hardening steel
Tempered safety hammer heads
Prevents hammer head from developing bulges or splintering
Fully hardened shaft
Particularly tough and wear-resistant as a result
Pilots on shaft of pin punch
Used to perfectly centre tool on clamping sleeves.
Datasheets(X)
 | |
Length (L) | 180 mm |
Blade length (L2) | 95 mm |
Width of tip (d) | 6 mm |
Striking-surface diameter (S) | 10 mm |
Length of tenon | 5 mm |
Diameter of tenon | 3 mm |
Last viewed
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Twist drill bit HSCo DIN 338 type RN oxide
Allen key, hexagon socket with ball head Extra-long design
VDE precision screwdriver, flat slotted
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Electrical insulating tape
Release tool For round connectors with locking lugs
Adapter for LBW 400
Cleaning device, vehicle, accessories
X-Finity logo T-shirt