Hydro sponge
Hydro sponge
CLNSPNG-HYDRO-L165XW110XH65MM
Register now and access more than 125,000 products
- Open cell structure
- Highly resistant to tearing and abrasion
- Absorbs water well
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Use the wet sponge to remove cement/joint mortar residue from tiles by applying light pressure.
Material | Polyurethane foam |
Length x width x height | 16.5 x 11 x 6.5 cm |
Length | 16.5 cm |
Width | 11 cm |
Height | 6.5 cm |
Cell structure | Open |
Form | Rectangular |
Compression force deflection conditions | 40% deformation |
Min. compression force deflection | 2.5 kPa |
Max. compression force deflection | 4.5 kPa |
Min. longitudinal tensile strength | 180 kPa |
Min. transverse tensile strength | 180 kPa |
Min. diagonal breaking elongation | 200 % |
Min. longitudinal breaking elongation | 200 % |