Hexagonal bolt with flange
EN 1665 steel 8.8 zinc plated
SCR-HEX-FLG-EN1665-8.8-SW16-(A2K)-M10X40
Register now and access more than 125,000 products
ISO EN 1665 replaces DIN 6921 | There is some limited similarity | Some head heights changed | Flange diameter is unchanged | Widths across flats for M10, M12, M14 and M16, M20 changed | Strength 12.9 removed | Fine thread removed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M10 |
Length (l1) | 40 mm |
Head diameter (dc) | 22.3 mm |
Head height (k1) | 10.4 mm |
Standards | EN 1665 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Hexagon head with flange |
Head details | 0 - not applicable |
Drive type | Outer hexagon |
External drive (s1) | WS16 |
Thread type | Metric thread |
Pitch | 1.5 mm |
Thread form | Standard metric thread |
Thread design | Partial thread |
Thread length (metric thread) | 26 mm |
Product class | A |
Area of application | 0 - not applicable |
Regulated area | 0 - not applicable |
Construction product | 0 - not applicable |
EC declaration of conformity (CE) | 0 - not applicable |
Shape of tip | 0 - not applicable |
Last viewed
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-nickel black (ZNBH)
Hexalobular screw with flattened half round head and collar
Circlip For bore hole shape J DIN 472 plain stainless steel
1-ear clamp with insert ring
Chemical injection mortar PURE EPOXY WIT-PE 1000
Single wire seal (SEAL) For uninsulated cable connector
Carbide indexable insert
Cartridge gun
Lock washer with right-angle cross-section, shape B DIN 127, A2 stainless steel, plain
Underfloor guide partial extension Dynamic NT soft-close