Heavy Duty non-slip floor marking adhesive tape
Floor marking adhesive tape, SA R11, non-slip
FLRMARKTPE-SA-NONSLP-YELLOW-75MMX12,5M
Register now and access more than 125,000 products
- Self-adhesive
- Extremely wear-resistant
- Quick to apply
- With silicone paper
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
- For outdoor use, apply butyl primer first. This significantly increases the adhesion strength of adhesive tape on all surfaces.
- The adhesion surface must be dry and free from grease and dust.
Datasheets(X)
Non-slip floor marking for indoor and outdoor rough and uneven surfaces such as stairs and ramp edges, warehouse/logistics, work areas, lifting platforms, workshop pits, wet areas.
Length | 12.5 m |
Width | 75 mm |
Thickness | 1.6 mm |
Colour | Yellow |
Suitable for use in the following materials | Concrete screed |
Area of application | Outdoors |
Min./max. temperature conditions | -20 to 80 °C |
Min./max. processing temperature | 15 to 25 °C |
Min. processing temperature | 15 °C |
Material | PU fabric reinforced |
Adhesive base | Natural rubber |
Last viewed
Stepped lever Made of shatter-proof and impact-resistant special plastic
Allen key
plastic sealing ring Natural, similar to DIN 7603
Aluminium runged leaning ladder Lightweight and strong
Spray bottle
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, zinc-plated, blue passivated (A2K)
Threaded fuse MIDI
Hexagonal bolt with thread up to the head DIN 558, steel 4.6, zinc-plated, blue passivated (A2K).
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain