HSCo Multi Performance combination tap

Name: HSCo Multi Performance combination tap
Brand: Würth
SKU: 0658500300

Combi screw tap, HSCo, Multi Performance
MATAP-COMBI-HSCO-MULTI-PERFORMANCE-M3
ZEBRA

Art.-no. 0658500300

EAN 4062856142521

All versions

Specification

Premium combination screw tap for precise drilling, thread cutting and countersinking/deburring in just one operation, now also for thicker workpieces with a material thickness of up to 2xD and for almost all materials, such as conventional steels, stainless steels (e.g. V2A, V4A), titanium, heat-resistant and high-strength steels of up to 1200 N/mm² strength and casting materials. Also suitable for non-ferrous metals, such as aluminium, aluminium alloys, bronze and plastics.

3 in 1 - Drilling, thread cutting and countersinking/deburring in just one operation

No tool change required, saves time and costs

The first combination screw tap, which is suitable for thicker workpieces in addition to sheet metal machining

Enables double-depth drilling, thread cutting and countersinking/deburring compared to conventional combination screw taps (2xD instead of 1xD)

The first combination screw tap that is not limited to use in materials up to 600 N/mm² strength, but suitable for almost all materials

Newly developed tool geometry and HSCo cutting material

Significantly longer service life compared to conventional combination screw taps

Newly developed tool geometry and HSCo cutting material

Very fast, precise work

Twist drill with speed geometry

Optimal centring when working on curved surfaces

Twist drill with 135° tip angle and optimised cross thinning

Newly developed shaft generation with a combination of polygon and straight shank with square drive

The polygon shaft prevents turning in the drill chuck, ensures optimal power transmission and protects the drill chuck from damage

Available exclusively from Würth

Notice

Countersinks according to DIN74-1 for countersunk head screws (according to DIN 7991) are not possible.

For use in cordless drill drivers as well as on hand-held, pillar and upright drills.

Sufficient coolant and lubricant must be added.

For tool/material assignments, see the overview tables.

Application

Instructions

After the drilling process, it is essential to drastically reduce the rotation speed for thread cutting and countersinking/deburring. The recommended cutting values, depending on the material and tool diameter, can be found in the cutting values overview included in the online shop.

Technical information

Thread type x nominal diameter	M3
Thread type	Metric thread
Material to be processed	Steel, Cast metal, Stainless steel, Titanium, Non-ferrous metal
Hole type	Clearance hole ≤ 2xD
Quality	ZEBRA-Premium
Suitable for machine type	Cordless screwdrivers, Drill, Pedestal drilling machine
Pitch	0.5 mm
Length	62 mm
Shank diameter	4.5 mm
Angle of the tip	135 Degree
Size of square	3.4 mm
Cutting material	HSCo
Surface	Vaporised
Shank style	Combination of polygonal and cylinder shank with square drive
Tolerance of screw taps	ISO 2 (6H)
Service life (points system)	4 of 4 points
Trueness to gauge (points system)	4 of 4 points
Versatility (points system)	4 of 4 points
Cutting behaviour (points system)	4 of 4 points
Chip formation (points system)	4 of 4 points
Suitable for tensile strength up to	1200 N/mm²
Material of sub-group	General structural steels, Non-alloyed tempering steels, Alloyed tempering steels, Nitriding steels, Tool steels, High-speed steels, Cast iron, Ductile iron, Malleable cast iron, White cast iron, Stainless steels, sulphurated, Stainless steels, austenitic, Stainless steels, martensitic, Titanium, Titanium alloys, Special alloys, Hardox, Spring steels, Aluminium, Aluminium alloys, Aluminium wrought alloys, Aluminium casting alloys (<10% silicon), Copper, low-alloyed, Brass, long-chipping, Bronze, long-chipping, Plastics, thermoset, Plastics, thermoplastic