Grinding paste For professional paintwork in paint shops and bodywork shops

Name: Grinding paste For professional paintwork in paint shops and bodywork shops
Brand: Würth
SKU: 0893469

Grinding paste
GRINDPAST-1500G

Art.-no. 0893469

EAN 4045989897179

All versions

Prices for customers after login

Grinding paste For professional paintwork in paint shops and bodywork shops

Art.-no. 0893469

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

For professional paintwork in paint shops and bodywork shops

High sanding proportion thanks to highly effective, very fine sanding components

Paint mist, dust inclusion, heavily weathered paint coats, scratches and other defective paint areas are easy to remove, level and compensate (abrasive effect)

Significantly enhanced surface texture

Extremely high cleaning performance

Also removes surface rust on chrome parts (e.g. wheel caps, radiator grilles, trim panels etc.).

Silicone-free

Notice

Apply even and only moderate pressure when applying the grinding paste. Take care when polishing over edges. Protect from frost.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For removing surface scratches in painted surfaces. Also suitable for removing scratches caused by car washes, oxidation and in areas in which sandpaper should not or cannot be used. Protect against frost and do not apply in direct sunlight.

Instructions

Pre-treat the paint surface with basic vehicle cleaner (art. no. 0893475). Apply the grinding paste with a suitable polishing cloth or polishing disc. Work in sections. Allow the grinding paste to dry briefly and then polish.

Contents	1136 ml
Weight of content	1500 g
Smell/fragrance	Characteristic
Colour	White
Min. flashing point	66 °C
Density	1.32 g/cm³
AOX-free	Yes
Silicone-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.