Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
ISO 7090 steel 200 HV hot dip galvanized
WSH-ISO7090-200HV-(HDG)-12
Register now and access more than 125,000 products
- Replaces DIN 125
- Washers with hardness class 200 HV can be used in combination with bolts in strength classes ≤ 8.8 and nuts in strength classes ≤ 8
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Suitable for screw thread | M12 |
Internal diameter (d1) | 13 mm |
Outer diameter (d2) | 24 mm |
Thickness (h1) | 2.500 mm |
Standards | ISO 7090 |
Material | Steel |
Vickers hardness, HV | 200 HV |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Last viewed
Carpet knife with slim, extremely robust metal handle
Engine oil TRIATHLON® Synthetic 5W-40
Hand-lever drum pump
1/2-inch impact socket wrench insert hexagon, metric, short
Heat-resistant crepe masking tape +120 °C
Metric double open-end wrench DIN 3110/ISO 1085
Hexagonal bolt with thread up to head
W14 disposable protective suit
Fixing clamp
No-hole sand paper with hook-and-loop backing AM LINE (green)