Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
ISO 7090 steel 200 HV hot dip galvanized
WSH-ISO7090-200HV-(HDG)-10
Register now and access more than 125,000 products
- Replaces DIN 125
- Washers with hardness class 200 HV can be used in combination with bolts in strength classes ≤ 8.8 and nuts in strength classes ≤ 8
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Suitable for screw thread | M10 |
Form | 0 - not applicable |
Internal diameter (d1) | 10.5 mm |
Outer diameter (d2) | 20 mm |
Thickness (h1) | 2 mm |
Standards | ISO 7090 |
Material | Steel |
Vickers hardness, HV | 200 HV |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Suitable for | 0 - not applicable |
Last viewed
Solder cable lug DIN 46211
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Solder cable lug DIN 46211
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Underfloor guide partial extension Dynamic NT soft-close
Aluminium paste AL 1100
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Clip remover
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Metric double-end flare-nut wrench Bi-hex with POWERDRIV®