Flat washer - large external diameter DIN EN ISO 7093-1, A2 stainless steel
ISO 7093-1 stainless steel A2 200 HV plain
WSH-ISO7093/1-A2-200HV-10
Register now and access more than 125,000 products
- Washer with large outside diameter
- Hardness min. 200 HV
DIN 9021 has been withdrawn and replaced by international standard DIN EN ISO 7093-1.
Nominal sizes 2.5 and 7 are no longer included in DIN EN ISO 7093-1 and therefore remain valid as DIN 9021.
Datasheets(X)
 | |
Suitable for screw thread | M10 |
Internal diameter (d1) | 10.5 mm |
Outer diameter (d2) | 30 mm |
Thickness (h1) | 2.5 mm |
Standards | ISO 7093-1 |
Material | Stainless steel A2 |
Surface | Plain |
Vickers hardness, HV | 200 HV |
RoHS-compliant | Yes |
Last viewed
Half-shell hexagon crimping insert
DUO wire end ferrule With plastic sleeve
Hexagonal bolt with thread up to the head DIN 933, A4 stainless steel, plain
HSCo green-ring machine tap for blind holes DIN 371/376
Hook-&-Loop Foam Pad Flexible Rotary Polisher
Socket contact ELO 0.63
TX screwdriver with round shank
Hammer drill bit Plus Duo-S Vario
3/8 inch socket wrench insert metric, hexagon, short
Thin-walled heat-shrink hose Without internal adhesive