Flat connector contact Sumitomo 2.3
Flat plug contact Sumitomo 2.3
FLPLGCNTCT-(SN)-2,3MM-(0,5-1,25SMM)
Register now and access more than 125,000 products
Datasheets(X)
Design | Unsealed |
Min./max. wire cross section | 0.5-1.25 mm² |
Min./max. diameter of insulation | 1.6-2.5 mm |
Nominal size of flat plug/push connector/blade connector | 2.3 mm |
Material | Brass |
Surface | Tin plated |
Last viewed
Hexagonal nut with clamping piece (all-metal) DIN 980, steel 8, zinc-plated, blue passivated (A2K)
1/2-inch impact socket wrench insert For TX socket screws, long
Metric ratchet combination wrench with ratchet function on both the box and open ends
Hexagon nut, low profile, with clamping piece (non-metal insert)
Sandpaper, waterproof
Thread-rolling screw
Metric double box-end wrench with POWERDRIV®
Electrical brake bleeder For all cars and trucks (couplings) and all motorcycles
Mechanical manual crimping pliers WK 22 For replaceable half-shell crimping inserts, width 22 mm
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled