Female thread plug-in nipple series 2000
Series 2000 female thread plug-in nipple
NPL-PN-S2000-IT-G3/8IN
Register now and access more than 125,000 products
High flow rate of up to 2100 l/min and a maximum operating pressure of 16 bar.
Enables optimum compressed air supply and output utilisation of compressed air consumers, resulting in greater productivity and lower energy costs.
Airtight connections
Low power consumption and high efficiency
Hardened steel nipples
For max. load-bearing capacity and long service life.
Exposed surfaces are chrome-plated, nickel-plated or galvanised.
High corrosion resistance – protected even under demanding conditions.
Series 2000 fittings comply with the European standard and have a nominal width of 7.6 mm.
Euro profiles are compatible with other compressed air fittings.
Material: Steel
Datasheets(X)
Material | Steel |
Connection thread | IT G 3/8 inch |
Length (L) | 36 mm |
Surface | ZN 8 silver |
Width across flats (SW) | 17 mm |
Max. pressure | 16 bar |
Flow capacity | 2.1 l/min |
Min./max. temperature resistance | -20 to 100 °C |
Last viewed
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 10.9, plain
Specially fused alumina sanding tip, pink
Throttle valve cleaner
Smoke Leak Detector W1 Probe
Pneumatic drill DBM 10-RL plus
HSCo blue-ring machine tap for blind holes DIN 371/376
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Crimping tool For insulated connectors
Pneumatic ratchet screwdriver DRS 1/2 inch
Star-shaped For SPS dry abrasive paper dispenser systems