Ergonomic aluminium handle
Aluminium handle ergonomic
ALUHNDL-ERGON-BLUE
Register now and access more than 125,000 products
Unique stability and long service life
FDA-compliant raw materials
- Also suitable for use in food preparation areas
Simple cleaning and maintenance
- Dishwasher safe (at max. 93 °C)
- Can be sterilised in autoclaves (max. 121 °С)
Plain colour and available in five different colours. Different colours reduce the risk of cross-contamination.
Phthalate-free
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please refer to the technical data sheets.
Datasheets(X)
Ergonomic aluminium handle with comfortable grip, rounded tip and hanging hole.
Can be attached to any Vikan product that requires a handle. However, it is not suitable for use with agents containing acid or chlorine.
Colour | Blue |
Material of long handle | Aluminium |
Material of handle | Plastic |
Diameter | 31 mm |
Min./max. temperature conditions | -20 to 100 °C |
Min./max. temperature conditions foodstuffs | -20 to 100 °C |
Connection type | Thread |
Product weight (per item) | 533 g |
Last viewed
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
HSCo Multi Performance combination tap
Rivet nut with small countersunk head Zinc-plated steel, blue passivated
Component for ORSY®system case
Hexagonal nut, low profile ISO 4035 A2-035 stainless steel, plain
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
1/2-inch impact socket wrench insert For hexagon socket screws, metric, long
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, A2 stainless steel, plain
Hexagon tapping screw DIN 7976, zinc-plated steel, blue passivated (A2K), shape C (with tip)
Lock washer with right-angle cross-section, shape B DIN 127, A2 stainless steel, plain