Welcome to Würth Taiwan For trade customers only

EU+ HSCo 90° TiAIN DIN 335 C conical countersink assortment 6 pieces

Con. c/s. cassette EU+ HSCo 90° TiAlN long 6 pcs
CNTSNK-CONI-SORT-EU+-HSCO-90°-TIALN-6PCS
ZEBRA

Art.-no. 0694220001
EAN 4065233033122

Prices for customers after login
EU+ HSCo 90° TiAIN DIN 335 C conical countersink assortment 6 pieces

Art.-no. 0694220001

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

The all-rounder with extremely irregular helix angles (EU), TiAlN coating and additional relief of the tap exclusively available from Würth for perfect countersinks and maximum performance. Available in the ORSY® system cassette.

Extremely irregular helix angles


  • Maximum surface quality: exact, round, chatter-free countersinks

  • Maximum smoothness in all materials

  • Higher cutting values possible


Exclusive additional relief of the tap


  • Up to 3x faster than conventional countersinks

  • Up to 2x more countersinks than conventional countersinks

  • Significantly less effort when used with hand drills

  • Deeper countersinks possible


Universal application


Optimum performance in machining of almost all materials and applications thanks to special tip geometry and HSCo cutting material



Long service life and high speed


Super-hard coating based on titanium-aluminium-nitride



3-face shank


  • No twisting in the drill chuck: faster, more comfortable working

  • Optimal power transmission

  • Protection of the drill chuck from damage

  • Little effort required to open and close the drill chuck


Compact and practical ORSY®-system-compatible system cassette with useful details, such as stackability, optimised joint and easy opening

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Number of pieces in assortment/set

6 PCS

Material to be processed

Steel, Cast metal, Stainless steel, Titanium, Special alloy, Hard and tough material, Non-ferrous metal, Plastic

Quality

ZEBRA-Premium

Standards

DIN 335

Form

C

Cutting material

HSCo

Countersink angle

90 Degree

Surface

TiAlN

Number of cutting edges

3 PCS

Shank style

3-face shank

Service life (points system)

4 of 4 points

Countersinking speed (point system)

4 of 4 points

Countersinking quality (point system)

4 of 4 points

Versatility (points system)

4 of 4 points

Countersinking behaviour (point system)

4 of 4 points

Material of sub-group

General structural steels, Non-alloyed tempering steels, Alloyed tempering steels, Nitriding steels, Tool steels, High-speed steels, Cast iron, Ductile iron, Malleable cast iron, White cast iron, Stainless steels, sulphurated, Stainless steels, austenitic, Stainless steels, martensitic, Titanium, Titanium alloys, Special alloys, Hardox, Spring steels, Aluminium alloys, Aluminium wrought alloys, Aluminium casting alloys (<10% silicon), Aluminium casting alloys (>10% silicon), Magnesium alloys, Copper, Brass, short-chipping, Brass, long-chipping, Bronze, short-chipping, Bronze, long-chipping, Plastics, thermoset, Plastics, thermoplastic, Plastics, aramide-fibre reinforced, Plastics, glass/carbon-fibre-reinforced

Legend
vc = cutting speed [m/min]
f = feed (mm/r)
The suggested cutting values are reference values and must be adapted to the respective conditions.
Conical countersink nominal diameter d1 For countersunk head screws For countersunk head screws
DIN EN ISO 10642
(formerly DIN 7991)
DIN EN ISO 2009, 2010, 7046, 7047
(formerly DIN 963, 964, 965, 966)
6.3 mm M3 M3
8.3 mm M4 -
10.4 mm M5 M4, M5
12.4 mm M6 M6
16.5 mm M8 M8
20.5 mm - M10
For dia. 16.5–20.5
Material designation Tensile strength vc f
Dia. 16.5 Dia. 20.5
General structural steels ≤ 500 N/mm² 45 0,170 0,180
≤ 1000 N/mm² 42 0,110 0,130
Unalloyed heat-treated steels ≤ 700 N/mm² 42 0,170 0,180
≤ 850 N/mm² 42 0,170 0,180
≤ 1000 N/mm² 34 0,110 0,130
Alloyed heat-treated steels ≤ 1000 N/mm² 34 0,170 0,180
≤ 1400 N/mm² 13 0,110 0,130
Nitriding steels ≤ 1000 N/mm² 34 0,110 0,130
≤ 1400 N/mm² 13 0,070 0,080
Tool steels ≤ 850 N/mm² 34 0,110 0,130
≤ 1400 N/mm² 13 0,070 0,080
High-speed steels ≤ 1400 N/mm² 13 0,070 0,080
Cast iron ≤ 240 HB 21 0,170 0,180
≤ 350 HB 18 0,170 0,180
Spheroidal-graphite and malleable iron ≤ 240 HB 18 0,170 0,180
≤ 350 HB 18 0,170 0,180
Chilled cast iron ≤ 350 HB 18 0,070 0,080
Stainless steels, sulphurated ≤ 900 N/mm² 9 0,110 0,130
Stainless steels, austenitic ≤ 1100 N/mm² 9 0,070 0,080
Stainless steels, martensitic ≤ 1200 N/mm² 9 0,070 0,080
Titanium and titanium alloys ≤ 850 N/mm² 9 0,110 0,130
≤ 1400 N/mm² 9 0,070 0,080
Special alloys ≤ 1600 N/mm² 7 0,110 0,130
Hardox Hardox 400–500, XAR 320, XAR 400 4 0,090 0,110
Spring steels ≤ 350 HB 9 0,070 0,080
Aluminium and aluminium alloys ≤ 400 N/mm² 77 0,210 0,230
Aluminium wrought alloys ≤ 650 N/mm² 55 0,210 0,230
Aluminium cast alloys ≤ 10 % Si ≤ 600 N/mm² 33 0,170 0,180
Aluminium cast alloys > 10 % Si ≤ 600 N/mm² 22 0,170 0,180
Magnesium alloys ≤ 400 N/mm² 77 0,210 0,230
Copper, low-alloyed ≤ 500 N/mm² 33 0,210 0,230
Brass, short-chipping ≤ 600 N/mm² 72 0,210 0,230
Brass, long-chipping ≤ 600 N/mm² 44 0,210 0,230
Bronze, short-chipping ≤ 600 N/mm² 72 0,210 0,230
≤ 850 N/mm² 72 0,210 0,230
Bronze, long-chipping ≤ 850 N/mm² 44 0,210 0,230
≤ 1000 N/mm² 44 0,210 0,230
Plastics ≤ 150 N/mm² 33 0,210 0,230
Cutting values for conical countersink EU+ HSCo TiAIN 90° DIN 335 C
For dia. 6.3–12.4
Material designation Tensile strength vc f
Dia. 6.3 Dia. 8.3 Dia. 10.4 Dia. 12.4
General structural steels ≤ 500 N/mm² 45 0,120 0,130 0,135 0,150
≤ 1000 N/mm² 42 0,070 0,080 0,090 0,100
Unalloyed heat-treated steels ≤ 700 N/mm² 42 0,120 0,130 0,140 0,150
≤ 850 N/mm² 42 0,120 0,130 0,135 0,150
≤ 1000 N/mm² 34 0,070 0,080 0,090 0,100
Alloyed heat-treated steels ≤ 1000 N/mm² 34 0,120 0,130 0,140 0,150
≤ 1400 N/mm² 13 0,070 0,080 0,090 0,100
Nitriding steels ≤ 1000 N/mm² 34 0,070 0,080 0,090 0,100
≤ 1400 N/mm² 13 0,040 0,050 0,060 0,060
Tool steels ≤ 850 N/mm² 34 0,070 0,080 0,090 0,100
≤ 1400 N/mm² 13 0,040 0,050 0,060 0,060
High-speed steels ≤ 1400 N/mm² 13 0,040 0,050 0,060 0,060
Cast iron ≤ 240 HB 21 0,120 0,130 0,140 0,150
≤ 350 HB 18 0,120 0,130 0,140 0,150
Spheroidal-graphite and malleable iron ≤ 240 HB 18 0,120 0,130 0,140 0,150
≤ 350 HB 18 0,120 0,130 0,140 0,150
Chilled cast iron ≤ 350 HB 18 0,040 0,050 0,060 0,060
Stainless steels, sulphurated ≤ 900 N/mm² 9 0,068 0,081 0,090 0,100
Stainless steels, austenitic ≤ 1100 N/mm² 9 0,040 0,050 0,060 0,060
Stainless steels, martensitic ≤ 1200 N/mm² 9 0,040 0,050 0,060 0,060
Titanium and titanium alloys ≤ 850 N/mm² 9 0,070 0,080 0,090 0,100
≤ 1400 N/mm² 9 0,040 0,050 0,060 0,060
Special alloys ≤ 1600 N/mm² 7 0,070 0,080 0,090 0,100
Hardox Hardox 400–500, XAR 320, XAR 400 4 0,070 0,080 0,080 0,090
Spring steels ≤ 350 HB 9 0,040 0,050 0,060 0,060
Aluminium and aluminium alloys ≤ 400 N/mm² 77 0,150 0,162 0,170 0,190
Aluminium wrought alloys ≤ 650 N/mm² 55 0,150 0,162 0,170 0,190
Aluminium cast alloys ≤ 10 % Si ≤ 600 N/mm² 33 0,120 0,130 0,140 0,150
Aluminium cast alloys > 10 % Si ≤ 600 N/mm² 22 0,120 0,130 0,140 0,150
Magnesium alloys ≤ 400 N/mm² 77 0,150 0,160 0,170 0,190
Copper, low-alloyed ≤ 500 N/mm² 33 0,150 0,160 0,170 0,190
Brass, short-chipping ≤ 600 N/mm² 72 0,150 0,160 0,170 0,190
Brass, long-chipping ≤ 600 N/mm² 44 0,150 0,160 0,170 0,190
Bronze, short-chipping ≤ 600 N/mm² 72 0,150 0,160 0,170 0,190
≤ 850 N/mm² 72 0,150 0,160 0,170 0,190
Bronze, long-chipping ≤ 850 N/mm² 44 0,150 0,160 0,170 0,190
≤ 1000 N/mm² 44 0,150 0,160 0,170 0,190
Plastics ≤ 150 N/mm² 33 0,150 0,160 0,170 0,190
EU+ HSCo 90° TiAIN DIN 335 C conical countersink assortment 6  including:
EU+ HSCo 90° TiAIN countersink DIN 335 C
1 x
EU+ HSCo 90° TiAIN countersink DIN 335 C

CNTSNK-CONI-EU+-HSCO-90DGR-TIALN-D6,3MM

ZEBRA
Description:
6.3 mm
The all-rounder with extremely uneven pitch (EU), TiAIN coating and additional relief grinding exclusively available from Würth for perfect countersinking and the highest performance.
Quantity: 1 x
EU+ HSCo 90° TiAIN countersink DIN 335 C
1 x
EU+ HSCo 90° TiAIN countersink DIN 335 C

CNTSNK-CONI-EU+-HSCO-90DGR-TIALN-D8,3MM

ZEBRA
Description:
8.3 mm
The all-rounder with extremely uneven pitch (EU), TiAIN coating and additional relief grinding exclusively available from Würth for perfect countersinking and the highest performance.
Quantity: 1 x
EU+ HSCo 90° TiAIN countersink DIN 335 C
1 x
EU+ HSCo 90° TiAIN countersink DIN 335 C

CNTSNK-CONI-EU+-HSCO-90DGR-TIALN-D10,4MM

ZEBRA
Description:
10.4 mm
The all-rounder with extremely uneven pitch (EU), TiAIN coating and additional relief grinding exclusively available from Würth for perfect countersinking and the highest performance.
Quantity: 1 x
EU+ HSCo 90° TiAIN countersink DIN 335 C
1 x
EU+ HSCo 90° TiAIN countersink DIN 335 C

CNTSNK-CONI-EU+-HSCO-90DGR-TIALN-D12,4MM

ZEBRA
Description:
12.4 mm
The all-rounder with extremely uneven pitch (EU), TiAIN coating and additional relief grinding exclusively available from Würth for perfect countersinking and the highest performance.
Quantity: 1 x
EU+ HSCo 90° TiAIN countersink DIN 335 C
1 x
EU+ HSCo 90° TiAIN countersink DIN 335 C

CNTSNK-CONI-EU+-HSCO-90DGR-TIALN-D16,5MM

ZEBRA
Description:
16.5 mm
The all-rounder with extremely uneven pitch (EU), TiAIN coating and additional relief grinding exclusively available from Würth for perfect countersinking and the highest performance.
Quantity: 1 x
EU+ HSCo 90° TiAIN countersink DIN 335 C
1 x
EU+ HSCo 90° TiAIN countersink DIN 335 C

CNTSNK-CONI-EU+-HSCO-90DGR-TIALN-D20,5MM

ZEBRA
Description:
20.5 mm
The all-rounder with extremely uneven pitch (EU), TiAIN coating and additional relief grinding exclusively available from Würth for perfect countersinking and the highest performance.
Quantity: 1 x
Empty box For DIN 335 C countersink
1 x
Empty box For DIN 335 C countersink

EMPTYBOX-COUNTERSINK-(D6,3-20,5)-6PCS

Description: Compact empty box for DIN 335 C conical countersinks in diameters 6.3 to 20.5 mm, compatible with the ORSY® system.
Quantity: 1 x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
CUT+COOL drilling and cutting oil

CUTOIL-DRILL-(CUT-COOL)-400ML

Multi cutting oil for light to medium machining work
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information