Drift punch According to DIN 6458
Drift punch
DRFTPNCH-8-L120MM
Register now and access more than 125,000 products
Chrome vanadium air hardening steel
Tempered safety impact heads
Prevents impact head from deforming or fracturing
Full length of shaft hardened
Particularly tough and wear resistant
Tempered impact head
2 versions available
- B = Lightweight version
- D = Heavy-duty version
Datasheets(X)
 | |
Width of tip (d) | 8 mm |
Last viewed
Spring lock washer, shape A DIN 137, spring steel, plain, shape A, curved
Adjustable open-end wrench
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
1-inch impact socket wrench insert hexagon, metric, short
Crimp cable lug, ring connector PVC-insulated
Adhesive lubricant HHS 2000®
Hexagonal bolt with thread up to the head DIN 558, steel 4.6, zinc-plated, blue passivated (A2K).
Tray insert
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled