Cutting disc For stainless steel
Cutting disc for stainless steel
CUTDISC-A2-TH1,0-BR16,0-D107MM
Register now and access more than 125,000 products
- High breakage resistance
- Storage: dry, at 20°C ambient temperature
- Work only with appropriate protective clothing
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting - increased risk of breakage!
- Ensure proper contact pressure
- Always clamp cutting discs (straight design) with metal ring towards the power tool
- For further information, please refer to the package insert
Meets the maximum safety requirements in accordance with the EN 12413 European standard.
Datasheets(X)
- Suitable for steel and especially for stainless steel
- For cutting thin-walled pipes and profiles, thin metal sheets etc.
Diameter | 107 mm |
Thickness | 1 mm |
Drill hole | 16 mm |
Max. rotation speed | 13.700 rpm |
Max. circumferential speed | 72 m/s |
Last viewed
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Hexagonal bolt with thread up to the head ISO 4017, steel 12.9, plain
Metric double-end flare-nut wrench Bi-hex with POWERDRIV®
Sign holder, depressed centre
Simplex wire rope clamp A4 stainless steel, with one screw for fastening
HSCo Longlife TiAlN+ red-ring machine tap for through holes DIN 371/376
Contact spray Oxidation solvent
Maintain and care set for motorcycles
Insect remover With special foam formula