Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
DIN 7991 / ISO 10642 bare stainless steel A4
SCR-CS-ISO10642-A4/070-HS3-M5X25
Register now and access more than 125,000 products
- Due to their head geometry, countersunk head screws have a limited load capacity according to this standard and possibly do not meet tensile or torsional strength requirements.
- The actual mechanical properties of the screw are unchanged and comply with ISO 3506-1
- Depending on the type, these items are supplied with threading almost up to the head
- Countersinks for screw heads in accordance with DIN 7991 and ISO 10642 must comply with DIN 74 shape F
DIN 7991 has been withdrawn and replaced by ISO 10642. There is some limited similarity (some head heights and head diameters changed | Nominal diameters M18, M22, M24 removed | Strength classes 10.9 and 12.9 added).
These screws can only be subjected to limited loads due to their head geometry, see DIN EN ISO 3506-1
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M5 |
Length (l1) | 25 mm |
Head diameter (dk) | 10.07 mm |
Head height (k1) | 3.1 mm |
Internal drive (s1) | HS3 |
Standards | ISO 10642 |
Material | Stainless steel A4 |
Property class | 070 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head |
Drive type | Hexagon socket |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Full thread |
Product class | A |
Last viewed
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Clamping plate III For MacPherson spring strut compressor
Assortment of vulcanised fibre sealing rings 1170 pieces in system case 4.4.1, DIN 7603, shape A
HSCo Longlife TiAlN+ red-ring machine tap for through holes DIN 371/376
Cut protection glove TIGERFLEX® W-230 Level C
T-handle socket wrench For hexagon head screws
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
TX bit C 6.3 (1/4 inch) with hole
Pneumatic hose reel DSA 15