Welcome to Würth Taiwan For trade customers only

Conical countersink assortment 6 pieces. Yellow/blue-ring HSS bit 90° short

Conical countersink cassette HSS bit 90° short
CNTSNK-SORT-HSS-BIT-90GRD-(D6,3-20,5MM)
ZEBRA

Art.-no. 0694025001
EAN 4062856851089

Prices for customers after login
Conical countersink assortment 6 pieces. Yellow/blue-ring HSS bit 90° short

Art.-no. 0694025001

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Particularly well-suited for machining conventional steels, cast iron and non-ferrous metals (aluminium, copper, aluminium alloys and plastics) with hand-held machines. Available in the ORSY® system cassette.

Burr- and chatter-free countersinking and deburring


Precision conical countersink with 3 cutting edges, precision-ground



Optimised geometry for hand-guided use


Less effort required, improved countersinking quality and chip removal compared to conventional conical countersinks



Standardised 1/4 inch hexagon shank


  • No slipping in the drill chuck, fits bit holders

  • Quick change between countersinking/screwing


Compact and practical ORSY®-system-compatible system cassette with useful details, such as stackability, optimised joint and easy opening

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Number of pieces in assortment/set

6 PCS

Material to be processed

Non-ferrous metal, Steel

Quality

ZEBRA-Premium

Cutting material

HSS

Countersink angle

90 Degree

Surface

Plain

Number of cutting edges

3 PCS

Shank style

Hexagon

Service life (points system)

2 of 4 points

Countersinking speed (point system)

2 of 4 points

Countersinking quality (point system)

2 of 4 points

Versatility (points system)

2 of 4 points

Countersinking behaviour (point system)

2 of 4 points

Material of sub-group

General structural steels, Non-alloyed tempering steels, Alloyed tempering steels, Nitriding steels, Tool steels, High-speed steels, Cast iron, Ductile iron, Malleable cast iron

Legend
vc = cutting speed [m/min]
f = feed (mm/r)
The suggested cutting values are reference values and must be adapted to the respective conditions.
Conical countersink nominal diameter d1 For countersunk head screws For countersunk head screws
DIN EN ISO 10642
(formerly DIN 7991)
DIN EN ISO 2009, 2010, 7046, 7047
(formerly DIN 963, 964, 965, 966)
6.3 mm M3 M3
8.3 mm M4 -
10.4 mm M5 M4, M5
12.4 mm M6 M6
16.5 mm M8 M8
20.5 mm - M10
For dia. 12.4–20.5
Material designation Tensile strength vc f
Dia. 12.4 Dia. 16.5 Dia. 20.5
General structural steels ≤ 500 N/mm² 15,8 0,020 0,020 0,020
≤ 1000 N/mm² 15,8 0,020 0,020 0,020
Unalloyed heat-treated steels ≤ 700 N/mm² 15,8 0,020 0,020 0,020
≤ 850 N/mm² 15,8 0,020 0,020 0,020
≤ 1000 N/mm² 15,8 0,020 0,020 0,020
Alloyed heat-treated steels ≤ 1000 N/mm² 13 0,020 0,015 0,015
≤ 1400 N/mm² 13 0,020 0,015 0,015
Nitriding steels ≤ 1000 N/mm² 13 0,020 0,015 0,015
≤ 1400 N/mm² 13 0,020 0,015 0,015
Tool steels ≤ 850 N/mm² 13 0,020 0,015 0,015
≤ 1400 N/mm² 13 0,020 0,015 0,015
High-speed steels ≤ 1400 N/mm² 13 0,020 0,015 0,015
Cast iron ≤ 240 HB 15,8 0,020 0,020 0,020
≤ 350 HB 15,8 0,020 0,020 0,020
Spheroidal-graphite and malleable iron ≤ 240 HB 15,8 0,020 0,020 0,020
≤ 350 HB 15,8 0,020 0,020 0,020
Chilled cast iron ≤ 350 HB 15,8 0,020 0,020 0,020
Aluminium and aluminium alloys ≤ 400 N/mm² 21,8 0,020 0,020 0,020
Aluminium wrought alloys ≤ 650 N/mm² 21,8 0,020 0,020 0,020
Aluminium cast alloys ≤ 10 % Si ≤ 600 N/mm² 21,8 0,020 0,020 0,020
Aluminium cast alloys > 10 % Si ≤ 600 N/mm² 21,8 0,020 0,020 0,020
Magnesium alloys ≤ 400 N/mm² 21,8 0,020 0,020 0,020
Copper, low-alloyed ≤ 500 N/mm² 21,8 0,020 0,020 0,020
Brass, short-chipping ≤ 600 N/mm² 21,8 0,020 0,020 0,020
Brass, long-chipping ≤ 600 N/mm² 21,8 0,020 0,020 0,020
Bronze, short-chipping ≤ 600 N/mm² 21,8 0,020 0,020 0,020
Bronze, short-chipping ≤ 850 N/mm² 21,8 0,020 0,020 0,020
Bronze, long-chipping ≤ 850 N/mm² 21,8 0,020 0,020 0,020
Bronze, long-chipping ≤ 1000 N/mm² 21,8 0,020 0,020 0,020
Plastics ≤ 150 N/mm² 21,8 0,020 0,020 0,020
For dia. 6.3–10.4
Material designation Tensile strength vc f
Dia. 6.3 Dia. 8.3 Dia. 10.4
General structural steels ≤ 500 N/mm² 15,8 0,025 0,025 0,025
≤ 1000 N/mm² 15,8 0,025 0,025 0,025
Unalloyed heat-treated steels ≤ 700 N/mm² 15,8 0,025 0,025 0,025
≤ 850 N/mm² 15,8 0,025 0,025 0,025
≤ 1000 N/mm² 15,8 0,025 0,025 0,025
Alloyed heat-treated steels ≤ 1000 N/mm² 13 0,020 0,020 0,020
≤ 1400 N/mm² 13 0,020 0,020 0,020
Nitriding steels ≤ 1000 N/mm² 13 0,020 0,020 0,020
≤ 1400 N/mm² 13 0,020 0,020 0,020
Tool steels ≤ 850 N/mm² 13 0,020 0,020 0,020
≤ 1400 N/mm² 13 0,020 0,020 0,020
High-speed steels ≤ 1400 N/mm² 13 0,020 0,020 0,020
Cast iron ≤ 240 HB 15,8 0,025 0,025 0,025
≤ 350 HB 15,8 0,025 0,025 0,025
Spheroidal-graphite and malleable iron ≤ 240 HB 15,8 0,025 0,025 0,025
≤ 350 HB 15,8 0,025 0,025 0,025
Chilled cast iron ≤ 350 HB 15,8 0,025 0,025 0,025
Aluminium and aluminium alloys ≤ 400 N/mm² 21,8 0,025 0,025 0,025
Aluminium wrought alloys ≤ 650 N/mm² 21,8 0,025 0,025 0,025
Aluminium cast alloys ≤ 10 % Si ≤ 600 N/mm² 21,8 0,025 0,025 0,025
Aluminium cast alloys > 10 % Si ≤ 600 N/mm² 21,8 0,025 0,025 0,025
Magnesium alloys ≤ 400 N/mm² 21,8 0,025 0,025 0,025
Copper, low-alloyed ≤ 500 N/mm² 21,8 0,025 0,025 0,025
Brass, short-chipping ≤ 600 N/mm² 21,8 0,025 0,025 0,025
Brass, long-chipping ≤ 600 N/mm² 21,8 0,025 0,025 0,025
Bronze, short-chipping ≤ 600 N/mm² 21,8 0,025 0,025 0,025
Bronze, short-chipping ≤ 850 N/mm² 21,8 0,025 0,025 0,025
Bronze, long-chipping ≤ 850 N/mm² 21,8 0,025 0,025 0,025
Bronze, long-chipping ≤ 1000 N/mm² 21,8 0,025 0,025 0,025
Plastics ≤ 150 N/mm² 21,8 0,025 0,025 0,025
Conical countersink assortment 6  including:
Conical countersink yellow/blue ring HSS bit 90° short
1 x
Conical countersink yellow/blue ring HSS bit 90° short

CNTSNK-CONI-MA-HSS-BIT-90DGR-D6,3

ZEBRA
Description:
6.3 mm
Particularly well-suited for machining conventional steels, cast iron and non-ferrous metals (aluminium, copper, aluminium alloys and plastics) with hand-held machines.
Quantity: 1 x
Conical countersink yellow/blue ring HSS bit 90° short
1 x
Conical countersink yellow/blue ring HSS bit 90° short

CNTSNK-CONI-MA-HSS-BIT-90DGR-D8,3MM

ZEBRA
Description:
8.3 mm
Particularly well-suited for machining conventional steels, cast iron and non-ferrous metals (aluminium, copper, aluminium alloys and plastics) with hand-held machines.
Quantity: 1 x
Conical countersink yellow/blue ring HSS bit 90° short
1 x
Conical countersink yellow/blue ring HSS bit 90° short

CNTSNK-CONI-MA-HSS-BIT-90DGR-D10,4MM

ZEBRA
Description:
10.4 mm
Particularly well-suited for machining conventional steels, cast iron and non-ferrous metals (aluminium, copper, aluminium alloys and plastics) with hand-held machines.
Quantity: 1 x
Conical countersink yellow/blue ring HSS bit 90° short
1 x
Conical countersink yellow/blue ring HSS bit 90° short

CNTSNK-CONI-MA-HSS-BIT-90DGR-D12,4MM

ZEBRA
Description:
12.4 mm
Particularly well-suited for machining conventional steels, cast iron and non-ferrous metals (aluminium, copper, aluminium alloys and plastics) with hand-held machines.
Quantity: 1 x
Conical countersink yellow/blue ring HSS bit 90° short
1 x
Conical countersink yellow/blue ring HSS bit 90° short

CNTSNK-CONI-MA-HSS-BIT-90DGR-D16,5MM

ZEBRA
Description:
16.5 mm
Particularly well-suited for machining conventional steels, cast iron and non-ferrous metals (aluminium, copper, aluminium alloys and plastics) with hand-held machines.
Quantity: 1 x
Conical countersink yellow/blue ring HSS bit 90° short
1 x
Conical countersink yellow/blue ring HSS bit 90° short

CNTSNK-CONI-MA-HSS-BIT-90DGR-D20,5MM

ZEBRA
Description:
20.5 mm
Particularly well-suited for machining conventional steels, cast iron and non-ferrous metals (aluminium, copper, aluminium alloys and plastics) with hand-held machines.
Quantity: 1 x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information