Conical brush Braided steel with M14 connecting thread
Tapered brush
TAPBRSH-AG-KNOTTED-STEEL-D115X12XM14
Register now and access more than 125,000 products
- No premature opening of the bundles when the brush is positioned at an angle
- Aggressive brushing effect with high wear resistance thanks to anti-clockwise braiding on the tapered brush
- For direct use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Use with an angle grinder for optimal results.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- Machining welding seams
- Removal of scale, rust, varnish, slag etc.
- Cleans concrete residue from formwork
 | |
Diameter (D) | 115 mm |
Effective width (A) | 12 mm |
Usable length of wire (H) | 24 mm |
Tool holding device (d) | M14 |
Wire diameter | 0.50 mm |
Design | Hardened, braided anti-clockwise |
Material of wire | Steel |
Aggressiveness | Hard |
Suitable for angle grinder (point system) | 4 of 4 points |
Max. rotation speed | 15000 1/min |
EN standard | 1083-2 |
Last viewed
HSCo Multi Longlife machine tap for blind holes DIN 371/376
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I10I, zinc-plated, yellow chromated (A2C/A3C)
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
HSS SMART STEP stepped twist drill bit assortment 3 pcs
4-CUTTER PLUS HAMMER DRILL BITS
Scriber