Clamping mandrel For cutting discs and grinding discs
Clamping mandrel for cutting and grinding disc
MNDRL-CUTDISC-D6-(0-8MM)-SHFT6MM
ZEBRA
Register now and access more than 125,000 products
Clamping range from 0–8 mm
Just one clamping mandrel for all clamping ranges.
Clamping screw is completely countersunk in clamping mandrel
No protruding thread sections, enabling work even in cramped spaces.
Clamping screw with large contact surface and right-hand thread (self-clamping effect)
Reliable holding of wheels.
Clamping screw with large support surface and lengthwise slit
Easy to loosen or tighten with a 17 mm open-ended spanner or slotted screwdriver.
Datasheets(X)
Suitable for bore diameter | 6 mm |
Length | 54 mm |
Shank diameter | 6 mm |
Last viewed
Engine oil TRIATHLON Synthetic 10W-60
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Impact tool Pin punches with pilots in accordance with DIN 6450
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Twist drill bit HSCo DIN 338 type RN oxide
Allen key, hexagon socket with ball head Extra-long design
VDE precision screwdriver, flat slotted
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Electrical insulating tape
Release tool For round connectors with locking lugs