Circlip pliers, shape C For bore circlips
DIN 5256 shape C drill hole circlip
CRCLIPPLRS-C-(19-60MM)
Register now and access more than 125,000 products
Standard: DIN 5256
Handle: Plastic-coated
Guarantees a secure grip, prevents slippage
Tip from compressed spring steel
Optimised stability, even with seized rings
Inserted tips
Offers maximum strength when loosening seized rings and allows rings to be installed with minimal distortion.
Screwed and mounted joint
High precision and optimised movement.
Large locating faces
Rings mounted without torsion.
Pliers head
Narrow design for optimum access to workpiece, including in hard-to-reach spots.
Datasheets(X)
Circlip pliers for inner rings.
 | |
Length (L1) | 180 mm |
Min./max. grip range | 19-60 mm |
Jaws length (L2) | 54 mm |
Material | Steel |
Diameter of tenon (D1) | 1.8 mm |
Form | C |
Last viewed
pias® drilling screw, round head with H recessed head
Spring cotter pin With single loop. Zinc-plated steel, blue passivated
Tensioning and cutting tool
Flat blunt-ended file DIN 7261, shape A
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
C 6.3 TX bit (1/4 inch)
Spring cotter pin With single loop. Zinc-plated steel, blue passivated
Plastic chain
Spare head
6-hole sandpaper with hook-and-loop backing AM LINE (6 inches)