Circlip pliers, shape C For bore circlips
DIN 5256 shape C drill hole circlip
CRCLIPPLRS-C-(12-25MM)
Register now and access more than 125,000 products
Standard: DIN 5256
Handle: Plastic-coated
Guarantees a secure grip, prevents slippage
Tip from compressed spring steel
Optimised stability, even with seized rings
Inserted tips
Offers maximum strength when loosening seized rings and allows rings to be installed with minimal distortion.
Screwed and mounted joint
High precision and optimised movement.
Large locating faces
Rings mounted without torsion.
Pliers head
Narrow design for optimum access to workpiece, including in hard-to-reach spots.
Datasheets(X)
Circlip pliers for inner rings.
 | |
Length (L1) | 140 mm |
Min./max. grip range | 12-25 mm |
Jaws length (L2) | 38 mm |
Material | Steel |
Diameter of tenon (D1) | 1.25 mm |
Form | C |
Last viewed
Hexagonal nut ISO 4032 steel, strength class 8, zinc-nickel-plated black (ZNBHL)
Ring-shaped crimp cable lug DIN 46234 and similar
Staples for hand-held stapler and hammer tacker
Hand tap, taper tap HSS DIN 352
Permanent marker set
System case 8.4.2 transparent
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Multi-purpose drill bit MFD-S Plus
Screw with flattened half round head and hexagon socket ISO 7380-1 steel FK010.9, zinc-nickel-plated black (ZNBHL)
Hexagonal bolt with threading up to head