Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-62X2,0
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 62 mm |
Suitable for groove diameter | 59 mm |
Internal diameter (d1) | 57.8 mm |
Eye width (a1) | 7.5 mm |
Width (b1) | 6 mm |
Thickness (s1) | 2 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
Finishing disc Useit® Superpad SG
Twist drill bit HSCo DIN 338 type RN MAGMA
Tap wrench DIN 1814 Performance, adjustable
LED UV torch For use when searching for leaks highlighted by UV leak detection additives in vehicle air-conditioning units
Simplex soft face hammer With steel housing
Spot weld cutter for HSCO pneumatic tools
Tungsten carbide bur with MX teeth
Premium machine screw tap HSS-E
Half-shell hexagon crimping insert
Metric double open-end wrench DIN 3110/ISO 1085