Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-34X1,5
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 34 mm |
Suitable for groove diameter | 32.3 mm |
Internal diameter (d1) | 31.5 mm |
Eye width (a1) | 5.4 mm |
Width (b1) | 3.8 mm |
Thickness (s1) | 1.5 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
Metric ratchet combination wrench with POWERDRIV®
Clamp meter TRMS 6000 AC/DC
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Twist drill bit HSS DIN 338 type RN 130°
Universal dispenser unit With 5 reel holders
Fall arrester device Pro with steel cable
Single wire seal (SEAL) For uninsulated cable connector
RW Edition multitool with leather pouch and Reinhold Würth signature
O-rings in mm
Lock washer DIN 128, steel, mechanically applied zinc coating (MZN)