Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-25X1,2
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 25 mm |
Suitable for groove diameter | 23.9 mm |
Internal diameter (d1) | 23.2 mm |
Eye width (a1) | 4.4 mm |
Width (b1) | 3 mm |
Thickness (s1) | 1.2 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
4-CUTTER PLUS HAMMER DRILL BITS
Asmt./set mixed tech. chemicals
Hand tap, taper tap HSS DIN 352
Bearing retaining compound high-strength and heat-resistant
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Perfect aluminium spray, matt
Twist drill bit HSS DIN 338 type RN 130°
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
ORSY® 10 dispenser system For thin-walled heat shrink hoses
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)