Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-24X1,2
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 24 mm |
Suitable for groove diameter | 22.9 mm |
Internal diameter (d1) | 22.2 mm |
Eye width (a1) | 4.4 mm |
Width (b1) | 3 mm |
Thickness (s1) | 1.2 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
Flat washer - extra-large series ISO 7094 steel 100 HV, zinc-plated
Tungsten carbide bur with MX teeth
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Cabin air filter QUICK FILTER PM 2.5
Electric/electronic
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Half-shell hexagon crimping insert
Point chisel For pneumatic chipping hammers