Ceramic engine protector
Ceramic engine oil additive
ADD-ENGOIL-300ML
Register now and access more than 125,000 products
Prolongs engine lifetime
- Provides long term protection
- Reduces friction and wear significantly
- Improves load carrying capacity of the lube film
- Improves viscosity of the oil
- Provides emergency lubrication
- Reduces engine noise level
- Reduces oil temperature
- Improves cold start performance
These instructions are only recommendations, which are based on our experience. We advise preliminary testing before use.
Datasheets(X)
- Suitable for all gasoline, diesel and LPG engines with or without turbochargers
- Can be mixed with all commercially available engine oils
- Add contents of one bottle to the warm motor oil, preferably shortly after oil change
- Shake well before use
- Recommended use: every 50,000 km
- Dosage: One bottle treats 4 to 6 liters of motor oil. Make sure the oil contents do not exceed the maximum oil level in your engine
Contents | 300 ml |
Shelf life from production | 24 Month |
Density | 0.895 kg/l |
Min. flashing point | 200 °C |
Last viewed
Air tool fittings 1500 Series
Metric double box-end wrench with POWERDRIV®
Connection hose
Bearing retaining compound high-strength and heat-resistant
Clamping grip pliers, C type, parallel
Electrical insulating tape
Metric combination wrench with POWERDRIV®
Metric double box-end wrench with POWERDRIV®
Twist drill bit HSCo DIN 338 type RN oxide
Hammer drill bit cassette with SDS and Duo-S Vario drive arbor Seven pieces