Welcome to Würth Taiwan For trade customers only
Care and lubricant spray - SLPSPR-300ML

Care and lubricant spray

Care and lubricating spray
SLPSPR-300ML

Art.-no. 0893224
EAN 4045989752652
All versions
Prices for customers after login
Care and lubricant spray

Art.-no. 0893224

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Protects and maintains plastic and rubber in vehicles, in technical equipment and in the home

Non-dirty, non-greasy and fully synthetic care and lubricant film


  • No contamination of clothing upon contact

  • No dirt or dust adhesion


Anti-slip protection against friction and noises


Eliminates squeaks and creaks on plastics (switches)



Effective, lasting protection


  • Displaces water and moisture

  • Does not age, gum up or stick

  • Provides lasting protection against UV rays

  • Easy, single-action application saves time


Care and lubricant spray resistant to high temperatures


Higher stability under thermal drying (radiators) - no loss of adhesion



Filled with environmentally-friendly propellant



Silicone-free, resin-free and AOX-free

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Combination of fully synthetic, low-viscosity and non-greasy oils with additives to protect against ageing, static charge and wear, particularly for plastics.

Instructions

Spray evenly on all surfaces to be maintained. Where necessary, wipe off with a cloth. Maintain a spraying distance of approx. 30 cm. Do not spray on the steering wheel and pedals.

Chemical basis

White oil with additives

Solid lubricant

0 - not applicable

Colour

Transparent

Density

0.739 g/cm³

Smell/fragrance

Characteristic

Min. flashing point

-80 °C

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

AOX-free

Yes

VOC concentration (CH)

89.56 %

Contents

300 ml

Container

Aerosol can

Shelf life from production

24 Month

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details