Welcome to Würth Taiwan For trade customers only

Carbide burr multi-performance TiAlSiN

Carbide burr multi-perf. TiAlSiN
MILBIT-TC-SPG-MULTIPERFM-TIALSIN-D6MM
ZEBRA

Art.-no. 0616587060
EAN 4056807673905

Prices for customers after login
Carbide burr multi-performance TiAlSiN

Art.-no. 0616587060

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

The premium all-rounder with titanium-aluminium-silicon-nitride coating and unique multi-tooth geometry for efficient roughing and smoothing in a single process on almost all materials, such as steel with a hardness < 65 HRC, cast iron, stainless steel, titanium, special alloys and hard and tough materials (e.g. Hardox). Also suitable for non-ferrous metals, such as aluminium alloys > 10% silicon, magnesium alloys, brass, copper, bronze and plastics.
  • Innovative multi-tooth geometry with a combination of double cut and fine toothing for a shiny, smooth surface finish, smooth milling behaviour and excellent handling

  • High-end TiAlSiN coating for up to 3x longer service life compared to uncoated burs with conventional double cut system

  • Up to 50 % higher cutting performance compared to burs with conventional double cut system

  • Manufactured in accordance with strict quality standards including full inspection of soldered connections

  • Sustainable product packaging made of 100 % PCR (recycled plastic from household waste), 100 % recyclable and Cradle to Cradle Certified® Bronze
Notice

Wear appropriate protective equipment when using the sanding tip, such as eye protection, hearing protection and protective gloves. Please note the recommended rotation speed (n) and cutting speed (Vc) for the material being processed as well as the tool/material assignments in the overview tables. Before using the sanding tip, please ensure that the tip rotates properly and that the clamping function on the tool drive works correctly. Do not choose a clamping length that is too small. We recommend a minimum clamping length of approx. 2/3 of the shaft length. Discolouration may occur on the shaft due to the extremely high cutting performance. This discolouration is caused by the extremely high temperature that the tool reaches and does not pose a safety risk. Materials are generally processed in reverse rotation. Suitable tool drives: flexible shaft drives, straight grinders, robots, machine tools.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Deburring, working contours, surface machining, weld seam processing, shaping, buffing cast iron, chamfering and rounding edges.

Form

Ogive shape

Head diameter x cutting edge length

6 x 18 mm

Length

50 mm

Shank diameter

6 mm

Material to be processed

Steel
Cast metal
Stainless steel
Titanium
Titanium alloy
Special alloy
Hard and tough material
Non-ferrous metal

Suitable for hardnesses up to

65 HRC

Quality

ZEBRA-Premium

Teeth type

Multi Performance

Cutting material

Carbide

Surface

TiAlSiN

Service life (points system)

4 of 4 points

Cutting efficiency (point system)

3 of 4 points

Surface quality/finish (points system)

3 of 4 points

Versatility (points system)

4 of 4 points

Guiding behaviour (point system)

4 of 4 points

Shank style

Cylindrical

Cutting values
For dia. 3.0-8.0
Material designationTensile strength Dia. 3.0Dia. 6.0Dia. 8.0
vcnf nfnf
fromtofromto fromto fromto
Steels
General structural steels≤ 850 N/mm²45060048000640009240003200018180002400025
Unalloyed quenched and tempered steels≤ 850 N/mm²45060048000640009240003200018180002400025
Low-alloy quenched and tempered steels≤ 850 N/mm²45060048000640009240003200018180002400025
Unalloyed quenched and tempered steels≤ 1,000 N/mm²45060048000640009240003200018180002400025
Low-alloy quenched and tempered steels≤ 1,000 N/mm²45060048000640009240003200018180002400025
Alloyed quenched and tempered steels≤ 1,200 N/mm²45060048000640009240003200018180002400025
Nitriding steels≤ 1,200 N/mm²45060048000640009240003200018180002400025
Tool steels≤ 1,200 N/mm²45060048000640009240003200018180002400025
High-speed steels≤ 1,200 N/mm²45060048000640009240003200018180002400025
Stainless steels
Stainless steels≤ 850 N/mm²25035027000370009130001900018,5100001400025
Sulphurated stainless steel≤ 850 N/mm²25035027000370009130001900018,5100001400025
Austenitic stainless steel≤ 850 N/mm²25035027000370009130001900018,5100001400025
Martensitic stainless steel≤ 850 N/mm²25035027000480009130001900018,5100001400025
Titanium and titanium alloys≤ 1,200 N/mm²25045027000480009130002400018,5100001800025
Special alloys≤ 1,200 N/mm²25045027000480009130002400018,5100001800025
Cast metals
Cast iron≤ 350 HB45060048000640009240003200018180002400025
Spheroidal graphite and malleable iron≤ 350 HB45060048000640009240003200018180002400025
Hard materials
Hardox≤ 1,400 N/mm²25035027000370009130001900018,5100001400025
Spring steels≤ 1,100 N/mm²25035027000370009130001900018,5100001400025
Non-ferrous metals
Aluminium cast alloys
>10 % Si
≤ 600 N/mm²25035027000370009130001900018,5100001400025
Magnesium alloys≤ 450 N/mm²25045027000480009130002400018,5100001800025
Low-alloy copper≤ 400 N/mm²60090064000950009320004800018240003600025
Short-chipping brass≤ 600 N/mm²60090064000950009320004800018240003600025
Long-chipping brass≤ 600 N/mm²60090064000950009320004800018240003600025
Short-chipping bronze≤ 850 N/mm²60090064000950009320004800018240003600025
Long-chipping bronze≤ 1,000 N/mm²60090064000950009320004800018240003600025
Plastics, duroplastic 4501100480001170009240005900018180004400025
Plastics, thermoplastic 4501100480001170009240005900018180004400025
Plastics, aramide-fibre-reinforced 4501100480001170009240005900018180004400025
Plastics,
glass-/carbon-fibre-reinforced
4501100480001170009240005900018180004400025
For dia. 10.0-12.0
Material designationTensile strength Dia. 10.0Dia. 12.0
vcnf nf
fromtofromto fromto
Steels
General structural steels≤ 850 N/mm²450600140001900031,5120001600037
Unalloyed quenched and tempered steels≤ 850 N/mm²450600140001900031,5120001600037
Low-alloy quenched and tempered steels≤ 850 N/mm²450600140001900031,5120001600037
Unalloyed quenched and tempered steels≤ 1,000 N/mm²450600140001900031,5120001600037
Low-alloy quenched and tempered steels≤ 1,000 N/mm²450600140001900031,5120001600037
Alloyed quenched and tempered steels≤ 1,200 N/mm²450600140001900031,5120001600037
Nitriding steels≤ 1,200 N/mm²450600140001900031,5120001600037
Tool steels≤ 1,200 N/mm²450600140001900031,5120001600037
High-speed steels≤ 1,200 N/mm²450600140001900031,5120001600037
Stainless steels
Stainless steels≤ 850 N/mm²250350800011000317000900036,5
Sulphurated stainless steel≤ 850 N/mm²250350800011000317000900036,5
Austenitic stainless steel≤ 850 N/mm²250350800011000317000900036,5
Martensitic stainless steel≤ 850 N/mm²250350800011000317000900036,5
Titanium and titanium alloys≤ 1,200 N/mm²25045080001400031,570001200036
Special alloys≤ 1,200 N/mm²25045080001400031,570001200036
Cast metals
Cast iron≤ 350 HB450600140001900031,5120001600037
Spheroidal graphite and malleable iron≤ 350 HB450600140001900031,5120001600037
Hard materials
Hardox≤ 1,400 N/mm²250350800011000317000900036,5
Spring steels≤ 1,100 N/mm²250350800011000317000900036,5
Non-ferrous metals
Aluminium cast alloys
>10 % Si
≤ 600 N/mm²250350800011000317000900036,5
Magnesium alloys≤ 450 N/mm²25045080001400031,570001200036
Low-alloy copper≤ 400 N/mm²600900190002900031160002400037
Short-chipping brass≤ 600 N/mm²600900190002900031160002400037
Long-chipping brass≤ 600 N/mm²600900190002900031160002400037
Short-chipping bronze≤ 850 N/mm²600900190002900031160002400037
Long-chipping bronze≤ 1,000 N/mm²600900190002900031160002400037
Plastics, duroplastic 4501100140003500031,5120003000036,5
Plastics, thermoplastic 4501100140003500031,5120003000036,5
Plastics, aramide-fibre-reinforced 4501100140003500031,5120003000036,5
Plastics,
glass-/carbon-fibre-reinforced
4501100140003500031,5120003000036,5
Key
vc = cutting speed [m/min]
f = feed [mm/r]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information