Car Windscreen Wiper Conventional RedLine
Car windscreen wiper Basic
WSCRNWPR-CAR-HOKMNT-L450MM-1PCE
Register now and access more than 125,000 products
Practical packaging with perforation
- Low stocking costs
- Lean assortment
- Optically attractive design
Profile edge protection
- Natural rubber wiping lip with special graphite compound coating
- Extremely smooth-running
- UV and ozone-resistant
- High operating temperature range
Metal bar system with stainless-steel rivets
- Resistant to the effects of weathering (72hrs. in salt spray test according to DIN EN ISO 9227)
- Good refillability
Make sure that the windshield is free of oil, wax, tar and other soiling so that the service life is not reduced. The windshield wipers should be replaced in case of smearing or decreasing wiping performance. We recommend replacing the windshield wipers every 6 months.
Datasheets(X)
3 in 1 Adaptor: 1pc, pre-installed; suitable for below car arms:
- 9 x 3 mm and 9 x 4 mm U-clip
- 4.8 mm Side Pin and 6.35 mm Side Pin
- 7.3 x 2.7 mm Bayonet
Length | 450 mm |
Length in inches | 18 in |
Last viewed
Hexagon nut, low profile, with clamping piece (non-metal insert) inch Similar to DIN 985, steel GR5, zinc-plated, blue passivated (A2K)
Clamping grip pliers, C type, parallel
Countersunk screw with hexalobular head ISO 14581, A2-070 stainless steel, plain
Black NBR70 round cord
VDE screwdriver For hexagon drive
1/4" socket wrench insert metric, long
Twist drill bit HSS DIN 338 type RN 130°
Diesel injection cleaner
4-CUTTER PLUS HAMMER DRILL BITS
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, plain