Burnishing roller
Burnishing Roller Sanding Fleece
SNDROLL-FLC-G180-100X100MM
Register now and access more than 125,000 products
- With 6 mm keyway and 19 hole for surface grinding machines
- Medium hardness
- Synthetic corundum
- Synthetic resin-bound sanding segments
- Produces impressive surfaces on stainless steel, copper, aluminium, brass etc. Also for cleaning oxide coatings and for smoothing plastics and wood.
- Circumferential speed: Specified by the machine used, but no more than 30 m/s = 3700 rpm
General working instructions: At high speeds a coarse grain acts like a finer grain and at low speeds a fine grain acts like a coarser one.
Use tools with a low contact pressure; high contact pressure leads to premature wear.
With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.
Attention: Pay attention to the running direction! Tools are only suitable for clockwise rotation.
Datasheets(X)
Produces impressive surfaces on stainless steel, copper, aluminium, brass etc. Also for cleaning oxide coatings and for smoothing plastics and wood.
Materials to be processed: Forged steel, malleable cast iron, grey cast iron, carbon steel, deep-drawn steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, wood.
Diameter x width x drill hole | 100 x 100 x 19 mm |
Grid size | 180 |
Material to be processed | Cr-Ni and other stainless steels |
Last viewed
ECOSLIDE full-extension concealed slide With integrated hydraulic damper
ASSY® 3.0 chipboard screw with head recess
VDE screwdriver, PZ recessed head
Pneumatic angle impact wrench DWSS 1/2 inch COMPACT
2C T-handle TX set 7 pcs with metal rack
Screwdriver set TX long version
Metric double-end flare-nut wrench Bi-hex with POWERDRIV®
1/4 inch ratchet With turntable switching
3C screwdriver
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled