Welcome to Würth Taiwan For trade customers only

Brake protector paste 1400

Brake protection paste 1400
BRKPAST-PROTECTION-1400-TUBE-100G

Art.-no. 0893116100
EAN 4045989793808

Prices for customers after login
Brake protector paste 1400

Art.-no. 0893116100

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Grey supple and adhesive paste with excellent lubricating properties, reliably separates and ensures excellent protection against corrosion.
  • High compressive strength ensures easy movement and minimum wear

  • Prevents corrosion, seizing and burning

  • High ceramic content

  • Ensures uniform loosening of screw connections

  • Does not contain any metallic pigments and is free from MoS2 as well as additives containing sulphur

  • Non-toxic

  • Silicone and metal-free

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Ideal for moving brake parts (not suitable for friction surfaces or bearing lubrication)

Instructions

Prior to application, remove dirt from the respective surface with a wire brush or a cleaner. Then use a brush to apply a thin and even coat of brake protector. Do not apply like grease.

Weight of content

100 g

Colour

Light grey (bright grey)

Smell/fragrance

Characteristic

Chemical basis

Mixed synthetic mineral oil

Shelf life from production

24 Month

Density

1.26 g/cm³

AOX-free

Yes

Silicone-free

Yes

Metal-free

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information