Brake fluid tester
Brake fluid tester pen V2 for DOT4
BRKFLUDTEST-EL-V2-DOT4
Register now and access more than 125,000 products
- 5 LEDs for exact display of water percent in the brake fluid
Dip the test probes into the brake fluid up to the plastic rim of the device, in case of skin contact with brake fluid, wash affected skin with water thoroughly.
Datasheets(X)
Use in automotive repair shop and service station
1. Press the button for power on, green LED will light up
2. Insert the tester into reservoir for one second then the test result will be correctly indicated by LEDs:
- Green: Battery OK
- Green/Yellow： Less than 1% of water
- Green/Yellow/Yellow: approx.. 2% water
- Green/Yellow/Yellow/Red: 3% water which required change brake fluid
- Green/Yellow/Yellow/Red/Red: more than 4% water that take immediate actions of changing brake fluid
Suitable for brake fluid | DOT 4 |
Length | 12 cm |
Last viewed
Gravel throw and underbody protection
WÜPLAST® pan head screw with flange and hexagon socket WN 1451, steel 10.9, zinc-nickel-plated, black passivated (P3R)
Hand tap, second tap HSS DIN 352
O-ring, inch assortment
Pipe linch pin
Pipe and fastening clamp Multifix
Hexagonal nut ISO 4032 steel, strength class 8, zinc-nickel-plated black (ZNBHL)
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon socket screw-in nut with collar DIN 908, A4 stainless steel, plain
Positive Lock blade receptacle