Brake fluid tester
Brake fluid tester pen V2 for DOT4
BRKFLUDTEST-EL-V2-DOT4
Register now and access more than 125,000 products
- 5 LEDs for exact display of water percent in the brake fluid
Dip the test probes into the brake fluid up to the plastic rim of the device, in case of skin contact with brake fluid, wash affected skin with water thoroughly.
Datasheets(X)
Use in automotive repair shop and service station
1. Press the button for power on, green LED will light up
2. Insert the tester into reservoir for one second then the test result will be correctly indicated by LEDs:
- Green: Battery OK
- Green/Yellow： Less than 1% of water
- Green/Yellow/Yellow: approx.. 2% water
- Green/Yellow/Yellow/Red: 3% water which required change brake fluid
- Green/Yellow/Yellow/Red/Red: more than 4% water that take immediate actions of changing brake fluid
Suitable for brake fluid | DOT 4 |
Length | 12 cm |
Last viewed
Adapter For plastic canisters
Concealed hinge, Nexis click-on 110 With shallow cup depth for thin and profiled doors
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Continuously adjustable one-ear clamp
Cylindrical pin, unhardened ISO 2338 A1 stainless steel (m6)
Pneumatic impact screwdriver DSS 3/4 inch H
Hexagonal nut with clamping piece (all-metal) DIN 980, steel 8, zinc-plated, blue passivated (A2K)
Engine oil TRIATHLON® Endurance III 5W-30
Rubber nozzle For blow guns
Hand tap, taper tap HSS DIN 352