Engine oil TRIATHLON® Endurance III 5W-30
Engine oil TRIATHLON Endurance III 5W-30
ENGOIL-ENDURANCEIII-5W30-1LTR
TRIATHLON
Register now and access more than 125,000 products
Fast oil supply at low temperatures
Oil change intervals from 30,000 to 50,000 km are possible depending on the manufacturer's specifications
HC synthetic
TRIATHLON® engine oils are produced and packaged in compliance with the most stringent quality specifications in accordance with DIN EN ISO 9001
- High level of product safety
- Comprehensive manufacturer approvals
Only high-quality first raffinates and raw materials are used for TRIATHLON ®oils
Fulfils key specifications of automotive manufacturers
Follow the vehicle and engine manufacturers’ operating instructions for normal and extended oil changes.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Datasheets(X)
Low-viscosity engine oil for top-class passenger cars
Contents | 1 l |
Type of oil | HC synthesis |
Viscosity grade | 5W-30 |
Approved for engine oils | VW 504 00 |
Recommended applications for engine oils | VW 500 00 |
Shelf life from production | 60 Month |
Density | 0.855 g/cm³ |
Min. flashing point | 210 °C |
Pour point | -45 °C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Throttle valve cleaner
No-hole sandpaper with hook-and-loop backing AM LINE (for steel materials)
AW® C 6.3 bit (1/4 inch) with patented AW output and colour coding
Tool head, small design For crimping pliers
Oil filter chain
Pin punch In accordance with DIN 6450 form C with hardened impact head
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
3/8-inch socket wrench insert, metric long
Twist drill bit HSCo DIN 338 type RN MFD VARIO
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled