Bonded seal
Steel zinc plated not self-centring
WSH-SCRSEAL-(A2K)-20,7X28,0X1,5
Register now and access more than 125,000 products
- Galvanised steel, blue passivated (A2K)
- Steel washer with moulded-on rubber sealing lip; for sealing bolt heads (primarily used with metric hexagon bolts in accordance with German DIN standard) and flange connections.
- For high pressure, vacuum and broad temperature ranges
- Optimum sealing effect due to precisely defined lip formation
- No pressing out, even under extreme pressure conditions thanks to metal-metal contact
- Minimal tightening torque
- No retightening of installed seal
- Replaces other previously used seals
- Can be used several times
- Quick, easy and reliable installation
- Overhead installation possible
- No special machining of metal surface required
- Temperature resistant from –35°C to +120°C
- Hardness of rubber seal: 70 ± 5 Shore
Professional installation:
It is recommended that a centring recess is provided for the sealing washer to prevent the seal being placed in an eccentric position.
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw | M16 |
Internal diameter (d1) | 20.7 mm |
Outer diameter (d2) | 28 mm |
Thickness (h1) | 1.5 mm |
Material | Steel |
Shore A hardness | 70 +/- 5 |
Surface | Zinc plated |
Min./max. temperature resistance | -35 to 120 °C |
Countersink diameter | 28.5 mm |
Through-hole according to DIN 69 f | 17 mm |
Last viewed
3/8-inch socket wrench insert, metric long
1/4 inch socket wrench insert, metric short
Internal lens for Solar
Guide drill bit A014C For adapter A2
Half-shell hexagon crimping insert
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Hand tap, third tap HSS DIN 352
Machine tap HSCo Longlife blue ring TiN blind hole DIN 371/376
System case 4.4.2
Hand tap, taper tap HSS DIN 352