Bonded seal
Steel zinc plated not self-centring
WSH-SCRSEAL-(A2K)-11,8X19,0X1,5
Register now and access more than 125,000 products
- Galvanised steel, blue passivated (A2K)
- Steel washer with moulded-on rubber sealing lip; for sealing bolt heads (primarily used with metric hexagon bolts in accordance with German DIN standard) and flange connections.
- For high pressure, vacuum and broad temperature ranges
- Optimum sealing effect due to precisely defined lip formation
- No pressing out, even under extreme pressure conditions thanks to metal-metal contact
- Minimal tightening torque
- No retightening of installed seal
- Replaces other previously used seals
- Can be used several times
- Quick, easy and reliable installation
- Overhead installation possible
- No special machining of metal surface required
- Temperature resistant from –35°C to +120°C
- Hardness of rubber seal: 70 ± 5 Shore
Professional installation:
It is recommended that a centring recess is provided for the sealing washer to prevent the seal being placed in an eccentric position.
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw | M10 |
Internal diameter (d1) | 11.8 mm |
Outer diameter (d2) | 19.1 mm |
Thickness (h1) | 1.5 mm |
Material | Steel |
Shore A hardness | 70 +/- 5 |
Surface | Zinc plated |
Min./max. temperature resistance | -35 to 120 °C |
Countersink diameter | 19.4 mm |
Through-hole according to DIN 69 f | 10.5 mm |
Last viewed
Metric combination wrench with POWERDRIV®
O-ring, metric
Electrician's slitting chisel
1/2" socket wrench insert Wedge shape
Crimp cable lug, ring connector PVC-insulated
Hand tap, second tap HSS DIN 352
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, A2 stainless steel, plain
Plastic end cap, round For pipes
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
4-CUTTER PLUS HAMMER DRILL BITS