Bodywork chisel flat oval
Bodywork chisel
HNDCHIS-BDYWRK-SL-HDS
Register now and access more than 125,000 products
Chromium-vanadium air hardening steel
Hardened safety hammer head
Prevents hammer head from developing bulges or splintering.
Full length of shaft hardened
Particularly tough and wear-resistant as a result.
Regrindable blade
Oil-resistant PVC handles
Prevents hand injuries due to slippage when striking.
Rebound impacts
Absorbed by the handle and not transferred to the hand.
Octagonal handle
Prevents tools rolling away, e.g. on scaffolding.
Datasheets(X)
For working on bodywork, particularly suitable for chiselling out electric spot welds.
For stone and metal working.
Length | 230 mm |
Cutting edge width | 26 mm |
Striking-surface length x width1 | 26 x 7 mm |
Last viewed
Flat blunt-ended file DIN 7261, shape A
C 6.3 slotted bit (1/4 inch)
Vehicle cable round cable (hose line) FLRYY
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Lock washer with right-angle cross-section, shape B DIN 127, A2 stainless steel, plain
Flat blunt-ended file DIN 7261, shape A
Thin-walled heat-shrink hose Without internal adhesive
CUT+COOL drilling and cutting oil
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
4-CUTTER PLUS HAMMER DRILL BITS