Base height adjuster, type U
Base height adjuster, type U
BSEHADJ-I-INVISIBLE-300KG-52MM
Register now and access more than 125,000 products
- Height adjuster made from die-cast zinc, polyamide gliders
- Load-bearing capacity: 300 kg/piece
- 12 mm diameter for wall thicknesses from 16 mm
Height adjustment up to 18 or 25 mm with AF 4 hex key
- Up to 150 kg/pc under load
- You can also use a battery-powered screwdriver to easily adjust, saving time
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Material | Die-cast zinc / polypropylene |
Height | 68.5 mm |
Distance between centre of hole and edge (A) | 52 mm |
Adjustment range | 25 mm |
Load capacity | 300 kg |
Product weight (per item) | 44.850 g |
Last viewed
Double-end box wrench, extra long
1" slider With pin detent
Needle scaler attachment For pneumatic chipping hammers
Plastic socket bulb For instrument lighting with fitting, for use in PCBs
Tungsten carbide bur with MX teeth
Lock washer with right-angle cross-section, shape B DIN 127, A2 stainless steel, plain
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
HSCo DIN 338 type RN MFD VARIO twist drill bit assortment 91 pieces
Hexagon nut ISO 4032 steel 8, hot-dip galvanised (HDG)
Power bank