Base height adjuster, type U
Base height adjuster, type U
BSEHADJ-I-INVISIBLE-300KG-32MM
Register now and access more than 125,000 products
- Height adjuster made from die-cast zinc, polyamide gliders
- Load-bearing capacity: 300 kg/piece
- 12 mm diameter for wall thicknesses from 16 mm
Height adjustment up to 18 or 25 mm with AF 4 hex key
- Up to 150 kg/pc under load
- You can also use a battery-powered screwdriver to easily adjust, saving time
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Material | Die-cast zinc / polypropylene |
Height | 48.5 mm |
Distance between centre of hole and edge (A) | 32 mm |
Adjustment range | 18 mm |
Load capacity | 300 kg |
Product weight (per item) | 32.900 g |
Last viewed
3/4-inch impact socket wrench insert hexagon, metric, short
Air cndtnng srvc. unit, vhcls., spr prt
Low-strength pipe and thread sealant with PTFE
Torque wrench with 9 x 12 mm square insert shank mount
Hand tap set HSS, DIN 352 3 pieces
Washer For screws with a heavy clamping sleeve DIN 7349, A2 stainless steel
Split pin ISO/WN 1234 steel zinc-plated
SAE J78 steel zinc-plated cs head
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)