Air tool fittings 1500 Series
Plug-in nipple male thread, series 1500
NPL-PN-S1500-BSPT-ET1/2IN
Register now and access more than 125,000 products
High air flow rate of up to 1,950 liters/minute (69 cubic feet/minute) and maximum operating pressure of 16 bar (232 psi).
Enables optimum compressed-air supply and output utilization of compressed-air consumers. This results in increased productivity and decreased energy costs.
Ergonomically designed locking bush.
Ensures a secure grip and prevents slipping off.
Low coupling force enables one-handed operation.
Only minimal force required for simple, fast, safe coupling and decoupling.
Air-tight connections.
Low energy consumption and high level of efficiency.
Hardened steel nipples and locking bushes.
For max. loadbearing capacity and long service life.
Exposed surfaces are chrome-plated, nickel-plated or galvanized.
High corrosion resistance and protection, even under demanding conditions.
- Series 1500 fittings comply with the Asian standard and have a nominal diameter of 7.5 mm.
- Euro profiles are compatible with the 2000 Series
Datasheets(X)
Professional use in compressed air systems in mechanical and tire workshops, bodyshops, metalworking and carpentry
Material | Steel |
Connection thread | 1/2 inch |
Length (L) | 47 mm |
Width across flats (SW) | 22 mm |
Max. pressure | 16 bar |
Flow capacity | 1950 l/min |
Last viewed
System assortment 4.4.1 combination wrenches, metric, 15° angled ring 17 pieces
Tool clamp For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
HSS type RN twist drill bit box 19 pieces
Screwdriver slotted slim With round shank
Cross cut chisel In line with DIN 6451
3/4-inch impact socket wrench insert hexagon, metric, short
wSafe® 2000 pneumatic safety coupling With hose connection
HSCo Multi Longlife machine tap for blind holes DIN 371/376
Multi-purpose grease III
TIPP® silicone pipe clamp