Abrasive fleece matting body
Sanding fleece matting body ZEBRA
MATBDY-FLC-280-FINE-60X40X6MM
ZEBRA
Register now and access more than 125,000 products
Quick and shoulder-free
Double-impregnated abrasive fleece achieves the required sanding pattern with quick and shoulder-free results.
Easy to assign fineness structure
Colour coding to prevent the different versions from being mixed up.
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Shadow-free matting, burnishing, polishing and for matching "pre-sanded" metal sheets, achieving impressive surfaces, cleaning oxide coatings and removing discolouration.
For forged steel, malleable iron, grey cast iron, carbon steel, deep drawing steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, as well as wood.
Diameter x width x shaft diameter | 60 x 40 x 6 mm |
Design | Fine |
Colour | Green |
Max. rotation speed | 7000 rpm |
Max. recommended rotation speed | 5000 rpm |
Material to be processed | Forged steel |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 8.8, zinc-nickel-plated, silver (ZNSHL)
Specially fused alumina sanding tip, pink
3/8" socket wrench insert Inch, hexagon, short
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Helical insert W.TEC® INSERT COIL Free Running
TIME-SERT® seat cutter
Protective glove Nitras 6100
Lock washer DIN 127, steel, mechanically applied zinc coating
Sledgehammer German design in accordance with DIN 1042
Lock washer DIN 128, steel, mechanically applied zinc coating (MZN)