Abrasive fleece matting body
Sanding fleece matting body ZEBRA
MATBDY-FLC-180-MEDIUM-40X25X6MM
ZEBRA
Register now and access more than 125,000 products
Quick and shoulder-free
Double-impregnated abrasive fleece achieves the required sanding pattern with quick and shoulder-free results.
Easy to assign fineness structure
Colour coding to prevent the different versions from being mixed up.
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Shadow-free matting, burnishing, polishing and for matching "pre-sanded" metal sheets, achieving impressive surfaces, cleaning oxide coatings and removing discolouration.
For forged steel, malleable iron, grey cast iron, carbon steel, deep drawing steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, as well as wood.
Diameter x width x shaft diameter | 40 x 25 x 6 mm |
Design | Medium |
Colour | Yellow |
Max. rotation speed | 9000 rpm |
Max. recommended rotation speed | 7500 rpm |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Abrasive cloth Roll, metal
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
3/8" socket wrench insert For external TX screws, short
3/8" socket wrench insert For external TX screws, short
1/2 inch socket wrench insert metric, hexagon, short
Rubber seal For 12 V 7-pin sockets
Refill adapter Lube-Shuttle®
Handle sleeve For packaging film
Partition element
Flat connector contact MCP 1.5